Bow Thruster Retrofit: Options, Install, and Cost
Adding a bow thruster can make docking easier, and less stressful.
By Doug Thompson
Every captain can use a helping hand. For anyone docking on a windy day with no one around to catch a line, that helping hand is a bow or stern thruster.
What Is a Bow Thruster?
A bow thruster is a compact electric or hydraulic propulsion unit mounted at the bow below the waterline. Activated from the helm or a joystick, it pushes the bow to port or starboard without forward motion. The engine, or a stern thruster, controls the stern, while you position the bow independently. Learn more about bow thruster advantages.
Three leading bow- and stern-thruster manufacturers are Sideshift, Lewmar, and Vetus. On most new cruisers sold today, a bow-and-stern thruster combination is standard or a near-universal option.
Subscribe Here For More Boating Content
“We provide an option for all boats 20 to 50 feet,” says Matt Sharp, sales director for Sideshift Thrusters. “Boats with no thrusters get a full retrofit, and boats with a factory bow thruster add our stern thruster and Dual Joystick Upgrade Kit, which makes the factory unit remote-controlled—so you can dock the boat from the dock.”
External vs. Tunnel Thrusters: Which Retrofit Fits?
External-Mount Thrusters
Sideshift offers an external-mount bow thruster that requires no holes below the waterline, which makes a retrofit practical for many older boats.
“For a retrofit on a 50-foot cruiser, we recommend a Sideshift ST350 stern thruster and its running mate, the SS350 bow thruster,” Sharp says. “Both are matched to boats up to 50 feet and 40,000 pounds, each using a submerged 24-volt electric motor driving dual 8-inch propellers mounted externally with every mounting hole above the waterline.”
Also Read
Marlow 70E Review: A Family Yacht With a Story
Purpose Perfected: Aboard a Marlow 70E Built Around Family Built around family, refined through experience, and finished in a color...
The install requires no tunnel cutting. Each unit arrives as a complete kit with the thruster, motor controller, wiring harness, wireless joystick, and a wireless remote key fob.
“All of our controls are wireless,” Sharp says. “The joystick mounts in the console and pairs easily, with no control cables to run through the boat. Every Sideshift system ships with a remote control on a lanyard, so you can work the thrusters from anywhere on board or from the dock.” For heavier vessels between 40,000 and 70,000 pounds, Sideshift offers the ST350-D dual stern thruster.
Tunnel Thrusters
Lewmar and Vetus offer tunnel thrusters, which require hauling the boat and cutting circular openings through the hull at the bow and stern. A marine professional then builds transverse thruster tunnels below the waterline, fairs them smooth with the hull to minimize drag, and installs the motors, controls, batteries, and wiring. A professional installation should have minimal effect on overall performance.
How Much Does a Bow Thruster Retrofit Cost?
Each Sideshift thruster installs in six to eight hours. For a 50-foot cruiser, complete bow-and-stern control costs $11,215, delivered as all-inclusive kits with controllers, wiring harnesses, wireless joystick, and remote key fob. Sideshift can refer installation partners for a quote. Tunnel installations vary with hull construction and yard rates, so get quotes from a qualified installer.
The payoff starts at the dock. Captains quickly gain confidence in close quarters, and wind and current stop dictating the approach.
“With a thruster at the bow, and ideally one at the stern, an owner can bring the boat into a tight slip single-handed, calmly, on the first attempt,” Sharp says. “That confidence changes how people boat. Because now you won’t worry about hitting a piling or another boat’s swim platform.”
Many owners simply go boating more often. When tight fuel docks, locks, and crowded marinas stop being stressful, people stop avoiding them, and the boat leaves the slip more often, which is the whole point of owning one.
Also Read:
Rideau Canal Boat Trip: A Week Aboard Le Boat
Eight Days Under Eight Knots on the Rideau Canal Cruising Canada's UNESCO World Heritage waterway aboard a Le...
“It does wonders for crew harmony, too,” Sharp says. “Docking stops being a shouting match, and more than one owner has told us the thruster saved their marriage. We can’t put that on the spec sheet, but we hear it a lot.”
Insurance companies also note that bow and stern thrusters help reduce minor docking accidents, one of the most common causes of recreational boat damage.
Why Add a Stern Thruster Too?
Boats with a factory bow thruster gain a lot from adding a stern unit. Sideshift’s optional Dual Joystick Upgrade Kit works with every major brand of bow thruster and puts both thrusters on a single wireless remote.
“This combination allows the boat to spin 360 degrees within her own length, walk sideways to port or starboard, and present her beam to the dock and hold it there,” Sharp says. “Because the controls are wireless, your first mate can work the bow and stern from anywhere on board or from the dock itself. For an owner who thought ‘I already have a thruster’ ended the conversation, it’s a tremendous performance and function upgrade.”




















