Lamb’s Yacht Center, Jacksonville, Florida

Located on the Ortega River in Jacksonville, Florida, Lamb’s Yacht Center began in 1936 and, with the exception of the past 12 years, has been owned and operated by the Lamb family. The marina is now back with the Lambs who are proud to call it their own again. PeggySue Lamb Williams recently re-purchased the marina and is now hard at work along with her three daughters and staff to reawaken the marine center and operate the family-founded marina in the “good old-fashioned way,” she says it was always known for.

Lamb’s Yacht Center offers 242 wet slips accommodating 15-foot to 90-foot boats, transient docking for up to 120-foot, as well as a covered and uncovered storage facility. The marina also provides a full service department boasting a 100 metric ton lift to accommodate haul-out and bottom jobs for all makes and models. Their service department is comprised of skilled painters, experienced mechanical repairmen and repower experts, as well as talented carpenters who can perform repairs both large and small—they can also provide complete refit and refurbishing services including classic and antique boat repair.

Located within the “Jacksonville Marina Mile,” the marine center is among the largest concentration of recreational boating services in the region and is proud to recycle and make an effort to keep waterways clean. Less than five miles from downtown Jacksonville, boaters will find all the additional services for their traveling needs (groceries, restaurants, post office, shops, etc.) within historic Avondale district and its tree-lined streets.

Amenities
• 242 wet slips
• Transient docking for up to 120-foot
• Covered/uncovered storage facility
• 50 Amp/30 Amp/120 V power available
• Two 30 ton hoists/one 40 ton hoist/one 100 ton hoist
• Warranty service center for Yanmar, Cummins and Mercruiser
• Warranty service dealer for Mercury and Evinrude
• Carpentry/paint/fiberglass services
• Concierge service
• Wi-Fi
• Pump-out
• Showers
• Restrooms
• Laundry facility

Contact:
Lamb’s Yacht Center
3376 Lake Shore Boulevard
Jacksonville, FL 32210
(904) 384-5577
lambsyachtcenter.com

Nathalie Gouillou, October 2015 Southern Exposure

NISI X50 Power Catamaran

European luxury yacht builder NISI introduces their first model in the high-performance GTX XPRESSO multihull series—the X50. This breakthrough multihull is a crossover sport yacht that combines spaciousness and comfort with performance and speed. NISI Yachts Founder and CEO Christos Lividas says it is the perfect yacht for active, social people seeking adventure and the power to get there.

The X50’s concept and design come from NISI’s engineering team with naval architecture by Setzer Yacht Architects. The X50 features rich teak and whitewashed oak, imported granite, leather soft goods, state-of-the-art electronics, and a full galley with stainless steel Siemen appliances and Kohler fixtures. Custom lighting, multi-zone digital audio and video setup, and central A/C are all controllable via smart phone.

[photomosaic type=”rectangular” ids=”5218,5217,5216,5215″ orderby=”rand”]

The X50 is also the only multihull that offers pod propulsion in this size range, offering an exhilarating yet steady ride. “This NISI features advanced construction that enables her to deliver speeds from 25 knots to a top speed of 35 knots, with the inimitable stability of a multihull,” says Don Marshall, NISI Yachts Chief Engineer. The designers also focused on all the playtime associated with time afloat, so the X50 is equipped for easy beaching and swimming with Kevlar and high-density grounding materials.

The huge flybridge combines a top-of–the-line stereo system, full galley and oversized barbeque grill. Built with inventive technologies, performance prowess, easy use, and family-fun features, it’s easy to understand why hull number two has already been sold.

Specifications

LOA:50′
Beam:24′
Draft:2’10”
Fuel/Water: 640/150 U.S. gals.
Power: 2 x Cummins Zeus Azipods
Base Price:Contact Dealer

Contact

nisiyachts.com

 

Southern Boating June 2014

Riviera 50 Enclosed Flybridge

Aussie Tough

Riviera Yachts has built top-quality boats for 34 years, launching more than 5,000 to date. The Australian builder has developed a reputation for turning out tough, strong boats that love bashing out to the fishing grounds. All that toughness, however, isn’t just limited to Riviera’s boats. During the global economic meltdown that began in 2008, Riviera and its dealers in 30 countries were hit hard financially—so much so, in fact, that it sought bankruptcy protection. That protection is usually only a first step and is generally followed by the appointment of a receiver and subsequent auction of the bankrupt firm’s assets.

But Riviera’s management team did not follow the usual pattern. They chose, instead, to tough it out and effectively manage the company back to financial health. Such an approach puts a massive strain on management, creditors, dealers, suppliers, and employees—in most cases, the bankrupt company can barely function, but that’s not what happened at Riviera. In fact, the builder not only continued to build—albeit at a reduced level—it developed new models and added new features to existing models. The end result is an encouraging recovery story and led to one of the newest Riviera offerings, the 50 Enclosed Flybridge.

Having tested several Rivieras—all equipped with the traditional open flybridge—I’d expected the enclosed flybridge model would prove to be an even better boat than those I had previously bashed around in. It was.

This newest Riviera with crisp, contemporary styling boasts a standout dock presence. Despite being one of the smaller boats tied along the dock, it was the vessel that first attracted my attention—and it will compare well with U.S. sportfish boats in the 55-foot range. As one would expect from such an experienced builder, the glasswork was excellent, perfectly fair, without signs of haze or print-through. Access to the vessel is off the swim step through either a port or starboard transom gate. The swim step is nearly the same height as most docks, which makes getting on and off the vessel safe, quick and easy.

Riviera designers have put together an open-plan saloon to take advantage of the fact that there is no inside helm station. The interior is bright and cheery, and will remain so even on a dull day due to the substantial amount of window glass. Windowsill heights are low enough that anyone sitting at the U-shaped dining settee and table, or on the lounge across from it, can comfortably see outside without stretching or getting up.

The U-shaped galley at the aft end of the saloon will become the focus of onboard entertainment. With the stainless-steel-framed aft saloon door pinned open and the similarly framed large glass window locked in the up position, the galley opens completely onto the aft deck. The bar directly across from the galley not only allows the cook quick and easy access to wines and spirits for sauces and other cooking requirements, but also allows those on the back deck to grab a cold one without having to move through or congregate in the saloon.

The galley’s easy access to the aft deck will allow the cook or caterers to easily prepare meals for more than a dozen people—especially when combined with the aft deck barbeque center. This area of the boat is also well protected from rain or blazing sun by the extended saloon roof.

Staterooms and heads are forward and down from the deck house, with the stairway ending on a landing or vestibule often seen on much larger yachts. Access to all three cabins is off that space. The 50 Flybridge we tested featured three staterooms: two with queen beds and the third with a pair of twins. By selecting a pod-drive system for this new model, Riviera has added five and a half feet to the interior hull living space compared with the traditional shaft-drive system. Riviera designers have thus been able to offer two nearly identical cabins. Both have plenty of natural light thanks to hull windows, plenty of storage, optional opening ports, and full ensuite heads—each with enclosed shower stalls. Riviera believes this layout allows the owner to choose either stateroom as the master.

My sea trial provided further evidence of this model’s mettle—from a cold start the twin 600-hp Cummins diesels fired instantly, without smoking or rattling. During our entire run the engines ran flawlessly as modern computer-controlled diesels are supposed to do. Once we cleared the no-wake zone, the vessel handled sharp turns easily, even going hard over from port to starboard.

This new Riviera manages to keep faith with those who want a traditional tough, strong, well-built fishing machine, while at the same time serving as a comfortable family motoryacht. The enclosed flybridge is a design stroke of genius. It’s large enough to allow the skipper to socialize with the whole family in style and comfort but offers staunch protection from the weather.

Visibility while cruising is unparalleled. The fit and finish throughout the vessel is excellent, and all equipment and appliances are first class. The pod-drive system, combined with joystick controls, will make anyone a great boat handler.

If one is looking for a boat that can function as both a fishing machine and a family cruiser, the new Riviera 50 Enclosed Flybridge should be on the “must see” list. One should also remember that the Queensland company has proven itself—during the recent recession—to be as tough as the boats it builds.

SPECIFICATIONS

LOA: 56′ 8″
Beam: 16′ 5″
Draft: 3′ 10″
Weight: 50,706 lbs.
Fuel/Water: 793/198 U.S. gals.
Power: Twin Cummins 600HP with Zeus pod drives
Cruise/Top Speed: 23/28 knots
Range: 307 nm @ 25 knots
MSRP: $1.47 million (plus $79,400 shipping)

CONTACT:

Chris McCafferty
(561) 267-1995
cmccafferty@riviera.com.au
rivieraaustralia.com

Roger McAfee, Southern Boating May 2014

Exit mobile version