OFF COURSE (Name Reserved) - 2018 37' WINTER CUSTOM YACHTS 37 Custom Carolina
Palm Beach Gardens Florida United States
$475,000 USD

The 2018 37’ Winter Custom Yachts, known as W 26 by the factory, is one of the most beautiful center console vessels in the world. Her proven North Carolina hull form provides a smooth, dry ride and is propelled by triple Mercury Verado 350s. A SeaKeeper 3 keeps this fishing platform steady. Although she’s designed as a tournament winner, she’s also a head-turning cocktail cruiser. A custom tow eye is accompanied by a solar panel and tracking device when she’s pulled behind a yacht. Contact us to schedule a viewing of this work of art.

Key Features

• Pedigree sea-keeping design and build quality by Winter Custom Yachts
• SeaKeeper 3 stabilization
• Triple Mercury Verado 350s – fully serviced with upgraded steering pumps
• Bow thruster
• Teak decks have lots of thickness and have been recently professionally refurbished including, pH-balance renewal to the wood
• Fresh detail, including toe rails and paint
• Lift-kept and has bottom paint
• 525-gallon fuel capacity

• All bilges, engine room and equipment faired and painted with Alexseal Cloud White
• Walkaround construction
• Layer 1” Diab A500 foam on cabin
• Layer 1808 Vectorply biaxial fiberglass impregnated with Pro Set Epoxy

• Centerline helm with helm pod
• Glove box with USB charging outlets
• (4) Molded in drink holders
• (2) Simrad NSO 19" touchscreen displays
• Simrad OP50 controller
• Simrad Open-Array radar
• Simrad NAC-2 autopilot
• Ritchie 6" Super sport compass mount
• Navico 3D Structural scan with forward scan transducer
• Wave Marine WIFI module
• Simrad VHF
• NAIS 500 NAIS signal module
• ACR spotlight controller
• FLIR MD625 fixed thermal imaging camera
• Fusion MS-NRX300 with JL Audio speakers and amps
• 20” Rigid Spot style LED light bar
• Mercury Smartcraft gauges
• Drink holders in console at helm
• Glove box with USB charging outlet
• C Zone display to control systems
• Molded footrest
• Release Marine chairs with flip up bolsters
• Barro ultra leather fabric
• Molded in curtain track on console

• Triple Mercury Verado 350 HP Outboards with up-to-date service
• Mercury gauges and controls
• Mercury power steering recently changed with upgraded pumps
• Mercury fuel filters
• Side Power SE 80 12 VDC Bow Thruster
• SeaKeeper 3 gyro stabilizer
• Jabsco saltwater pump
• Jabsco Blaster freshwater pump
• (4) 1500 GPH Rule bilge pumps with Ultra Safety Systems Jr float switch
• (2) 2000 GPH Rule bilge pumps with Ultra Safety Systems Jr float switch
• Rule sump boxes
• FRP discharges on hull sides
• Dometic freshwater flush head with 15 gallon holding tank
• Livorsi 1150 high speed trim tabs
• New batteries

• 525 gallon fuel capacity in cockpit
• 50 gallon fresh water tank
• 15 gallon hot water heater

• (2) Newmar 60-amp battery charger 12-volt, (3) bank
• C-Zone control system on all DC systems
• Custom Paneltronics panels
• 120-volt AC, 24-volt DC
• 30-amp, 240-volt AC service
• 12-volt DC lighting throughout
• All wiring guided by ABYC standards
• (2) 803 TIX Lumishore underwater lights in transom

• Forward bow seating with storage within
• (6) 15-degree rod holders in bow cap
• (4) 8” pull up cleats on top deck
• Faux teak toe rail with chafe gear
• Custom removable bow pulpit and gear
• RC-5 low profile windlass
• MaxSet 8 polished SS plow anchor
• Genuine teak decking
• Radiused gunnel faces
• Dive tank storage under love seat
• (2) Fuel fills on side gunnels
• Water fill on side gunnels
• Waste access on gunnels
• Full pass-through side door with gate

• Palm Beach Towers hard top
• Custom molded hardtop with polished aluminum frame T-top style
• Upgraded hardtop to incorporate thicker 3” hardtop
• Radar Pod
• Molded aft single 12-volt LED Lumitec spreader light with molded pod
• Molded forward single 12-volt LED Lumitec spreader light with molded pod
• Molded navigation lights
• Recessed dome lights 12-volt, tri-color
• (6) Rod holders welded to aft side of hardtop
• Anchor light on mast
• Molded in “Pancake” Birdsall Marine teaser reels
• 20” Rigid Spot style LED light bar
• Rupp Revolution Top Gun outrigger bases
• Rupp HD carbon fiber poles 18’
• Rupp HD carbon fiber center rigger
• One piece acrylic curtain enclosure

• (6) 30 degree rod holders in cockpit
• (2) Hawse pipes on covering board top
• (2) 10” cleats mounted on side wall I cockpit
• Custom baitwell in transom
• Baitwells to feature laminated curved glass
• Genuine teak decking
• 26” freeboard from transom to bow
• Full pass-through transom door with gate
• Under gunnel accent lighting throughout
• Release Marine triple seat with flip-up bolster
• Concealed access to shore power and water spigots under gunnels
• (2) In-deck fish box (16” W x 14” D x 60” L)
• Dive ladder on transom
• Access to lazarette and gyro compartment
• Frigid Rigid cooler with slides

• Integrated solar panel charging system with monitoring capability
• WIFI network extender for connection to C-Zone up to 350’
• Custom SS towing eye

• Teak stair treads
• Quarter sawn teak interior
• Teak and maple flooring
• Cabinetry throughout interior with satin finish
• White painted surfaces
• Solid teak countertops
• Solid surface countertops with stainless steel undermount sink
• Jabsco freshwater flush head
• Satin Southco Mobella McCoy door handles
• Satin Southco push button latches
• Recessed Imtra Ventura LED lights with white bezel in overhead
• Access to all electronics and AC panel
• Oversized bilge pumps
• Warning beacon light on top of tower to indicate bilge pump operation

• A buildup of Alexseal fairing products followed by Alexseal primer to a finished surface
• Topsides: Alexseal Cloud White
• Hull: Alexseal Stars and Stripes
• Boot Stripe: Alexseal Cloud White
• Bottom Paint: SeaHawk Cukote Black
• 1” solid stainless steel bumper metal

• (2) Layers ½” marine grade Okoume plywood
• Layer 1708 Vectorply biaxial fiberglass outside bottom impregnated with Pro Set Epoxy
• Layers 1708 Vectorply biaxial fiberglass on keel and chine
• Layers 1708 Vectorply biaxial fiberglass inside bottom up through hull side
• Laminated Douglas Fir stringers

• Hull side 2 layers 6mm Okoume plywood Loyds type 1088
• Layer 1708 Vectorply biaxial fiberglass impregnated with Pro Set Epoxy
• Laminated Douglas Fir rib bands
• Laminated Douglas Fir chine
• Laminated Douglas Fir sheer clamp